Dee Shackles

D Shackle

Dee Shackles

It is made of high quality alloy steel by die forging.
Each shackle will be marked with Wll permanently, Wll from 2t ～110t
The Maximum testing load is twice of the working load, the minimum breaking load is 4 times of the Wll.
About the bearing capacity of 2t ～ 80t,T8 grade is 40% ～ 100% up higher than the s6 grade in the same dimension; About the bearing capacity of 110t, T8 grade is 29% up higher than the S6 grade in the same dimension.
With the same working load capacity, T8 products are smaller than s6, which enables T8 to be mainly employed in limited space.

Category: lifting Shackles

Description

Description

T8 D Shackle

Product Parameter

Art.No	WLL (t)	W (mm)	D (mm)	d (mm)	E (mm)	P (mm)	S (mm)	L(DW type) (mm)	Self Weight(DW type) (kg)
T-DW2-3/8	2	17	12	9.5	23	9.5	32	52.5	0.13
T-DW2.5-7/16	2.5	19	14	11	27	11	36.5	62	0.2
T-DW3.25-1/2	3.25	20.5	16	13	30	13	41.5	70.5	0.27
T-DW5-5/8	5	27	20	16	38	16	51	88	0.57
T-DW7-3/4	7	32	22	19	46	20.5	60.5	102.5	0.99
T-DW9.5-7/8	9.5	36.5	27	22.5	53	24.5	71.5	121	1.57
T-DW12.5-1	12.5	43	30	25.5	60.5	25.5	81	139	2.3
T-DW15-1 1/8	15	46	33	29	68.5	32	91	153	3.42
T-DW18-1 1/4	18	51.5	36	32	76	35	100	168.5	4.48
T-DW21-1 3/8	21	57	39	35	84	38	111	184.5	6.46
T-DW30-1 1/2	30	60.5	42	38	92	41	122	199	7.65
T-DW40-1 3/4	40	73	52	44.5	106.5	54	146	244	12.48
T-DW50-2	50	82.5	60	51	122	51	171.5	275	18.63
T-DW80-2 1/2	80	105	72	66.5	144.5	66.5	203	346	36.02

Art.No	WLL (t)	W (mm)	D (mm)	d (mm)	E (mm)	P (mm)	S (mm)	L(DW type) (mm)	Self Weight(DW type) (kg)
T-DX2-3/8	2	17	12	9.5	23	9.5	32	54	0.13
T-DX2.5-7/16	2.5	19	14	11	27	11	36.5	62	0.21
T-DX3.25-1/2	3.25	20.5	16	13	30	13	41.5	71.5	0.28
T-DX5-5/8	5	27	20	16	38	16	51	89	0.6
T-DX7-3/4	7	32	22	19	46	20.5	60.5	105	1.04
T-DX9.5-7/8	9.5	36.5	27	22.5	53	24.5	71.5	121	1.63
T-DX12.5-1	12.5	43	30	25.5	60.5	25.5	81	136.5	2.38
T-DX15-1 1/8	15	46	33	29	68.5	32	91	149.5	3.59
T-DX18-1 1/4	18	51.5	36	32	76	35	100	164.5	4.65
T-DX21-1 3/8	21	57	39	35	84	38	111	179	6.71
T-DX30-1 1/2	30	60.5	42	38	92	41	122	194.5	8.05
T-DX40-1 3/4	40	73	52	44.5	106.5	54	146	239	13.18
T-DX50-2	50	82.5	60	51	122	51	171.5	269	19.3
T-DX80-2 1/2	80	105	72	66.5	144.5	66.5	203	344	37.22
T-DX110-3	110	127	85	76	165	89	216	401	65.3

S6 D Shackle

Product Parameter

Art.No	WLL (t)	W (mm)	D (mm)	d (mm)	E (mm)	P (mm)	S (mm)	L(DW type) (mm)	Self Weight(DW type) (kg)
S-DW0.5-1/4	0.5	12	8	6.5	15.5	6.5	22	36.5	0.04
S-DW0.75-5/16	0.75	13.5	10	8	19	8	26	44.5	0.08
S-DW1-3/8	1	17	12	9.5	23	9.5	32	52.5	0.13
S-DW1.5-7/16	1.5	19	14	11	27	11	36.5	62	0.2
S-DW2-1/2	2	20.5	16	13	30	13	41.5	70.5	0.27
S-DW3.25-5/8	3.25	27	20	16	38	16	51	88	0.57
S-DW4.75-3/4	4.75	32	22	19	46	20.5	60.5	102.5	0.99
S-DW6.5-7/8	6.5	36.5	27	22.5	53	24.5	71.5	121	1.57
S-DW8.5-1	8.5	43	30	25.5	60.5	25.5	81	139	2.3
S-DW9.5-1 1/8	9.5	46	33	29	68.5	32	91	153	3.42
S-DW12-1 1/4	12	51.5	36	32	76	35	100	168.5	4.48
S-DW13.5-1 3/8	13.5	57	39	35	84	38	111	184.5	6.46
S-DW17-1 1/2	17	60.5	42	38	92	41	122	199	7.65
S-DW25-1 3/4	25	73	52	44.5	106.5	54	146	244	12.48
S-DW35-2	35	82.5	60	51	122	51	171.5	275	18.63
S-DW55-2 1/2	55	105	72	66.5	144.5	66.5	203	346	36.02

Art.No	WLL (t)	W (mm)	D (mm)	d (mm)	E (mm)	P (mm)	S (mm)	L(DX type) (mm)	Self Weight(DX type) (kg)
S-DX0.5-1/4	0.5	12	8	6.5	15.5	6.5	22	37	0.06
S-DX0.75-5/16	0.75	13.5	10	8	19	8	26	45	0.1
S-DX1-3/8	1	17	12	9.5	23	9.5	32	54	0.13
S-DX1.5-7/16	1.5	19	14	11	27	11	36.5	62	0.21
S-DX2-1/2	2	20.5	16	13	30	13	41.5	71.5	0.28
S-DX3.25-5/8	3.25	27	20	16	38	16	51	89	0.6
S-DX4.75-3/4	4.75	32	22	19	46	20.5	60.5	105	1.04
S-DX6.5-7/8	6.5	36.5	27	22.5	53	24.5	71.5	121	1.63
S-DX8.5-1	8.5	43	30	25.5	60.5	25.5	81	136.5	2.38
S-DX9.5-1 1/8	9.5	46	33	29	68.5	32	91	149.5	3.59
S-DX12-1 1/4	12	51.5	36	32	76	35	100	164.5	4.65
S-DX13.5-1 3/8	13.5	57	39	35	84	38	111	179	6.71
S-DX17-1 1/2	17	60.5	42	38	92	41	122	194.5	8.05
S-DX25-1 3/4	25	73	52	44.5	106.5	54	146	239	13.18
S-DX35-2	35	82.5	60	51	122	51	171.5	269	19.3
S-DX55-2 1/2	55	105	72	66.5	144.5	66.5	203	344	37.22
S-DX85-3	85	127	85	76	165	89	216	401	65.3