Round Slings – Eye & Eye

Home/Lifting slings/Round Slings – Eye & Eye

Round Slings – Eye & Eye

• Superior strength-to-weight ratio.

• Excellent bending fatigue

. • Similar elongation properties.

• Will not sink, UHMPE slings float!

• 1/7 the weight of wire rope slings.

• Do not corrode or require lubrication.

• Easy to inspect

Bulked Nylon Eye Sleeves are provided at no additional charge in all sling eyes.

SX Eye Sleeves are provided for an additional charge and combine the light weight and non-absorbing UHMPE properties into a braided sleeve.

Eye Sleeves are available for an additional charge and are more cut resistant thanSX Eye Sleeves.

 

Body covers are provided for an additional charge and may prevent abrasion damage and the penetration of dirt and debris into the rope fibers. Velcro® closure enables easy installation and removal, streamlining sling inspection. Body Covers are captivated at each sling end by Retainer Straps which prevent the cover from shifting.
Category:

Description

Rope Diameter (Inches)Rope Diameter (mm) Stock NumberWorking Load Limits (Lbs.) Sling Weight Based on Min. Length (Lbs.)Rope Weight    Per Adder   Foot (Lbs.) Minimum Sling Length (Bearing) Feet-Inches
Vertical90° Basket
1/4″6mmEE-UHMPE-1/41,6003,2000.10.022′-2″
5/16″8mmEE-UHMPE-5/162,3004,6000.20.032′-10″
3/8″9mmEE-UHMPE-3/83,5007,0000.20.043′-4″
7/16″11mmEE-UHMPE-7/164,2008,4000.20.043′-10″
1/2″12mmEE-UHMPE-1/26,20012,4000.50.064′-5″
9/16″14mmEE-UHMPE-9/167,50015,0000.60.085′
5/8″16mmEE-UHMPE-5/810,20020,4001.10.115′-7″
3/4″18mmEE-UHMPE-3/413,70027,4001.40.136′-7″
13/16″20mmEE-UHMPE-13/1614,80029,6002.10.167′-2″
7/8″22mmEE-UHMPE-7/818,50037,0002.80.27′-10″
1″24mmEE-UHMPE-122,00044,0003.50.238′-10″
1-1/16″26mmEE-UHMPE-1-1/1625,80051,6004.20.289′-5″
1-1/8″28mmEE-UHMPE-1-1/829,40058,8005.10.3210′-1″
1-1/4″30mmEE-UHMPE-1-1/433,00066,0006.80.3611′
1-5/16″32mmEE-UHMPE-1-5/1639,20078,4008.40.4211′-7″
1-1/2″36mmEE-UHMPE-1-1/244,20088,40011.40.5213′-2″
1-5/8″40mmEE-UHMPE-1-5/858,000116,00015.80.6614′-6″
1-3/4″44mmEE-UHMPE-1-3/462,000124,00020.30.7815′-8″
2″48mmEE-UHMPE-271,000142,00026.40.9117′-7″
2-1/8″52mmEE-UHMPE-2-1/885,000170,00033.81.118′-11″
2-1/4″56mmEE-UHMPE-2-1/496,000192,00040.31.220′-1″
2-1/2″60mmEE-UHMPE-2-1/2106,000212,00054.81.522′-1″
2-5/8″64mmEE-UHMPE-2-5/8119,000238,00071.81.723′-4″
2-3/4″68mmEE-UHMPE-2-3/4132,000264,00091.61.924′-6″
3″72mmEE-UHMPE-3156,000312,000119.82.126′-6″
3-1/8″76mmEE-UHMPE-3-1/8170,000340,00027′-8″
3-1/4″80mmEE-UHMPE-3-1/4188,000376,00028′-11″
3-1/2″84mmEE-UHMPE-3-1/2221,000442,00030′-11″
3-5/8″88mmEE-UHMPE-3-5/8250,000500,00032′-1″
3-3/4″92mmEE-UHMPE-3-3/4263,000526,00033′-4″
4″96mmEE-UHMPE-4304,000608,00035′-4″
4-1/8″100mmEE-UHMPE-4-1/8324,000648,00036′-6″
4-1/4″104mmEE-UHMPE-4-1/4339,000678,00037′-10″
4-1/2″108mmEE-UHMPE-4-1/2365,000730,00039′-8″
4-5/8″112mmEE-UHMPE-4-5/8376,000752,00040′-11″
4-3/4″116mmEE-UHMPE-4-3/4385,000770,00042′-2″
5″120mmEE-UHMPE-5413,000826,00044′-1″
5-1/8″124mmEE-UHMPE-5-1/8442,000884,00045′-5″
5-1/4″128mmEE-UHMPE-5-1/4471,000942,00046′-7″
5-1/2″132mmEE-UHMPE-5-1/2499,000998,00048′-6″
5-5/8″136mmEE-UHMPE-5-5/8528,0001,056,00049′-10″
5-3/4″140mmEE-UHMPE-5-3/4556,0001,112,00051′-0”
6″144mmEE-UHMPE-6585,0001,170,00052′-11″
6-1/8″148mmEE-UHMPE-6-1/8613,0001,226,00054′-2″
6-1/4″152mmEE-UHMPE-6-1/4640,0001,280,00055′-5″
6-1/2″156mmEE-UHMPE-6-1/2670,0001,340,00057′-5″
6-5/8″160mmEE-UHMPE-6-5/8690,0001,380,00058′-7″
6-3/4″164mmEE-UHMPE-6-3/4720,0001,440,00059′-10″
7″168mmEE-UHMPE-7750,0001,500,00061′-10″
7-1/8″172mmEE-UHMPE-7-1/8790,0001,580,00063′-0”
7-1/4″176mmEE-UHMPE-7-1/4810,0001,620,00064′-2″
7-1/2″180mmEE-UHMPE-7-1/2840,0001,680,00066′-2″
7-5/8″184mmEE-UHMPE-7-5/8870,0001,740,00067′-5″
7-3/4″188mmEE-UHMPE-7-3/4890,0001,780,00068′-7″
8″192mmEE-UHMPE-8920,0001,840,00070′-7″
8-1/8″196mmEE-UHMPE-8-1/8950,0001,900,00071′-10″
8-1/4″200mmEE-UHMPE-8-1/4980,0001,960,00073′-1″